SellingLeads Introduction:
The selling leads of Ceramic Ozone Generator (SY-G20) is published by OEM Collecting Industrial Co.,Limited,a major Chinese manufacturer and exporter in Water Purifier wholesale industry . You can check out the specification of Ceramic Ozone Generator (SY-G20) below and also see the authentications and testimonials of Ceramic Ozone Generator (SY-G20) . or you may get any optional result according to the following keywords: ozone generator , ceramic ozone generator , ceramic ozone generators , ozone generator air purifier , ozone generator water purifier
Description:
Item: Ozone Generator Model No.: SY-G20 Pipe: 125x62x52mm Power: 36x92mm Cooling: Air Cooling Interface Sizes: @6mm Water Flow: no L/min Power: 20W Oxygen In 0.012m3/h: ozone output 600mg/h Oxygen In 0.03m3/h: ozone output 1150mg/h Oxygen In 0.12m3/h: ozone output 1750mg/h Ozone Generator Major Characteristics: (1) High Efficiency: 800-1000g/m2, 4-5 times more than the common ozone generators (2) Low Output: High frequency corona discharge, the consume rate of 8-10KW. h/kg O3 (3) Small Sizes: Save your space, the cubage is 1/4 to 1/3 than common ozone generators at the same output (4) Very Long Life, Non-Coorode, Non-Oxygenization, High Temp. Resistance: Imported material to be sintered into the high purified ceramic, 316 stainless inner electrode and tighten firmware, polytetrafluorethylene/Teflon, high purified silicon rubber material, all the pipes equipped with radiator slice, 10 years normal life (5) No Break: the generating pipe with the working voltage of 10％ of the Breaking voltage, high non-conductivity rate, low power (6) Effective Cooling Systems: there is outer air cooling and inner water cooling combination, low degradation rate at continuous working (7) Good Voltage Flexibility: 50V to generate ozone and 200V to get the efficiency, convenient to adjust the ozone levels (8) Save Oxygen Source: High ozone density/output and save the oxygen cost
-
-
-
-
-
